Install wityCMS on Ubuntu 16.04 | 18.04 with Apache2, MariaDB and PHP 7.2

wityCMS is an open source content management system (CMS) software built on PHP that can be used to create a single page or multiple pages websites and blogs.

If you are looking for a solution to build dynamic and beautify websites, then wityCMS is a good place to start. It is built on an open source core with support for open standards, which might be very useful in helping you run your digital content.

This CMS platform is designed for ease of use to allow webmasters to collaborate and automate engaging experiences with users across multiple devices, including mobile.

For more about wityCMS, please check their Homepage

This brief tutorial is going to show students and new users how to install wityCMS on Ubuntu 16.04 / 18.10 and 18.04 LTS.

To get started with installing wityCMS, follow the steps below:

Step 1: Install Apache2 HTTP Server

wityCMS requires a web server and Apache2 HTTP server is the most popular open source web server available today. To install Apache2 server, run the commands below:

sudo apt update
sudo apt install apache2

After installing Apache2, the commands below can be used to stop, start and enable Apache2 service to always start up with the server boots.

sudo systemctl stop apache2.service
sudo systemctl start apache2.service
sudo systemctl enable apache2.service

Now that Apache2 is installed. to test whether the web server is working, open your browser and browse to the URL below.

If you see the page above, then Apache2 is successfully installed.

Step 2: Install MariaDB Database Server

wityCMS also requires a database server to store its content. If you’re looking for a truly open source database server, then MariaDB is a great place to start. To install MariaDB run the commands below:

sudo apt-get install mariadb-server mariadb-client

After installing MariaDB, the commands below can be used to stop, start and enable MariaDB service to always start up when the server boots.

Run these on Ubuntu 16.04 LTS

sudo systemctl stop mysql.service
sudo systemctl start mysql.service
sudo systemctl enable mysql.service

Run these on Ubuntu 18.10 and 18.04 LTS

sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
sudo systemctl enable mariadb.service

Next, run the commands below to secure the database server with a root password if you were not prompted to do so during the installation.

sudo mysql_secure_installation

When prompted, answer the questions below by following the guide.

• Enter current password for root (enter for none): Just press the Enter
• Set root password? [Y/n]: Y
• New password: Enter password
• Re-enter new password: Repeat password
• Remove anonymous users? [Y/n]: Y
• Disallow root login remotely? [Y/n]: Y
• Remove test database and access to it? [Y/n]:  Y
• Reload privilege tables now? [Y/n]:  Y

Now that MariaDB is installed, to test whether the database server was successfully installed, run the commands below.

sudo mysql -u root -p

type the root password when prompted.

If you see a similar screen as shown above, then the server was successfully installed.

Step 3: Install PHP 7.2 and Related Modules

wityCMS is a PHP based CMS and PHP is required. However, PHP 7.2 may not be available in Ubuntu default repositories. To run PHP 7.2 on Ubuntu 16.04 and previous, you may need to run the commands below:

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2 libapache2-mod-php7.2 php7.2-common php7.2-sqlite3 php7.2-mysql php7.2-gmp php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-gd php7.2-bcmath php7.2-xml php7.2-cli php7.2-zip

After installing PHP 7.2, run the commands below to open PHP default configuration file for Apache2.

sudo nano /etc/php/7.2/apache2/php.ini

The lines below is a good settings for most PHP based CMS. Update the configuration file with these and save.

file_uploads = On
allow_url_fopen = On
short_open_tag = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

Everytime you make changes to PHP configuration file, you should also restart Apache2 web server. To do so, run the commands below:

sudo systemctl restart apache2.service

Now that PHP is installed, to test whether it’s functioning, create a test file called phpinfo.php in Apache2 default root directory. ( /var/www/html/)

sudo nano /var/www/html/phpinfo.php

Then type the content below and save the file.

<?php phpinfo( ); ?>

Next, open your browser and browse to the server’s hostname or IP address followed by phpinfo.php

/phpinfo.php

You should see PHP default test page.

Step 4: Create wityCMS Database

Now that you’ve installed all the packages that are required for wityCMS to function, continue below to start configuring the servers. First run the commands below to create a blank wityCMS database.

To logon to MariaDB database server, run the commands below.

sudo mysql -u root -p

Then create a database called witycms

CREATE DATABASE witycms;

Create a database user called witycmsuser with a new password

CREATE USER 'witycmsuser'@'localhost' IDENTIFIED BY 'new_password_here';

Then grant the user full access to the database.

GRANT ALL ON witycms.* TO 'witycmsuser'@'localhost' IDENTIFIED BY 'user_password_here' WITH GRANT OPTION;

Finally, save your changes and exit.

FLUSH PRIVILEGES;
EXIT;

Step 5: Download wityCMS Latest Release

To get wityCMS latest release you may want to use Github repository. Install git tool to download wityCMS packages..

sudo apt install git

After installing curl and Composer above, change into the Apache2 root directory and download wityCMS packages from Github.

cd /var/www/html
sudo git clone  witycms
cd /var/www/html/witycms
sudo git submodule init
sudo git submodule update

Then run the commands below to set the correct permissions for wityCMS root directory and give Apache2 control.

sudo chown -R www-data:www-data /var/www/html/witycms/
sudo chmod -R 755 /var/www/html/witycms/

Step 6: Configure Apache2

Finally, configure Apahce2 site configuration file for wityCMS. This file will control how users access WebsiteBaker content. Run the commands below to create a new configuration file called witycms.conf

sudo nano /etc/apache2/sites-available/witycms.conf

Then copy and paste the content below into the file and save it. Replace the highlighted line with your own domain name and directory root location.

<VirtualHost *:80>
     ServerAdmin [email protected]
     DocumentRoot /var/www/html/witycms
     ServerName example.com
     ServerAlias www.example.com

     <Directory /var/www/html/witycms/>
          Options FollowSymlinks
          AllowOverride All
          Require all granted
     </Directory>

     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined
    
     <Directory /var/www/html/witycms/>
            RewriteEngine on
            RewriteBase /
            RewriteCond %{REQUEST_FILENAME} !-f
            RewriteRule ^(.*) index.php [PT,L]
    </Directory>
</VirtualHost>

Save the file and exit.

Step 7: Enable the wityCMS and Rewrite Module

After configuring the VirtualHost above, enable it by running the commands below

sudo a2ensite witycms.conf
sudo a2enmod rewrite
sudo systemctl restart apache2.service

Then open your browser and browse to the server domain name. You should see wityCMS setup wizard to complete. Please follow the wizard carefully.

Then follow the on-screen instruction.  Choose the installation language, site name and others, then continue.

After that, choose a predefiined home page for the portal and continue

Next, type in the database connection info created above and continue.

After that, create an admin account, then click Lunch Install!

That should install wityCMS

Enjoy~

Congratulation! You have successfully installed wityCMS on Ubuntu 16.04 | 18.04 and 18.10.

You may also like the post below: