This brief tutorial shows students and new users how to install Joomla content management system on Windows 11 using Windows Subsystem for Linux (WSL or WSL2).
You do not need to install any software or run a virtual machine in Windows 11 in order to install Joomla. You can now install and run Joomla CMS directly from Windows 11 via Windows Subsystem for Linux (WSL). Back in 2017, Microsoft released WSL and later WSL2 that lets developers run a GNU/Linux environment, including most command-line tools, utilities, and applications directly in Windows without setting up a virtual machine or dual-boot.
WSL2 is the new and improved version comes with performance boost, full system call compatibility, and built with a new architecture and that delivers features that make WSL an amazing way to run a Linux environment in Windows.
The new Windows 11 will come with many new features and enhancements that will work great for some while adding some learning challenges for others. Some things and settings have changed so much that folks will have to learn new ways to work with and manage Windows 11.
With Windows 11, installing WSL is a bit different than in Windows 10. However, the steps below is going to show you how to do that.
To install and run Joomla on Windows 11 you must first install and enable WSL.
Install Windows Subsystem for Linux in Windows 11
To enable WSL in Windows, you will want to open the Command Prompt as administrator. Click on Start then begin typing Command Prompt.
Next, right-click Command Prompt app and choose to Run as administrator.
When the console opens, run the commands below to install Windows Subsystem for Linux (WSL):
wsl --install
Wait for WSL to be installed.
After installing, you should get a success message similar to the lines below:
Installing: Virtual Machine Platform Virtual Machine Platform has been installed. Installing: Windows Subsystem for Linux Windows Subsystem for Linux has been installed. Downloading: WSL Kernel Installing: WSL Kernel WSL Kernel has been installed. Downloading: GUI App Support Installing: GUI App Support GUI App Support has been installed. Downloading: Ubuntu The requested operation is successful. Changes will not be effective until the system is rebooted.
Restart your computer.
WSL should be installed and ready to use. When you want to update, simply run the commands below:
wsl --update
Install Specific Linux distro on Windows 11
Now that WSL is installed, you can now install Linux distro of your choice. To list the available distributions to install, simply run the commands below:
wsl --list --online
You should then see all available distributions that can be installed on WSL.
NAME FRIENDLY NAME
Ubuntu Ubuntu
Debian Debian GNU/Linux
kali-linux Kali Linux Rolling
openSUSE-42 openSUSE Leap 42
SLES-12 SUSE Linux Enterprise Server v12
Ubuntu-16.04 Ubuntu 16.04 LTS
Ubuntu-18.04 Ubuntu 18.04 LTS
Ubuntu-20.04 Ubuntu 20.04 LTS
To install a Linux distribution from the list above, simply run the commands below using the distribution name. For example, to install Ubuntu 20.04, run the commands below:
wsl --install -d ubuntu-20.04
You should then get a message that the distribution is installed.
Downloading: Ubuntu 20.04 LTS Installing: Ubuntu 20.04 LTS Ubuntu 20.04 LTS has been installed. Launching Ubuntu 20.04 LTS.
After installing, you should get a Ubuntu command console with setup details.
Installing, this may take a few minutes.
Please create a default UNIX user account. The username does not need to match your Windows username.
For more information visit:
Enter new UNIX username: Richard
New password:
Retype new password:
passwd: password updated successfully
Installation successful!
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
Welcome to Ubuntu 20.04 LTS (GNU/Linux 4.4.0-22000-Microsoft x86_64)
Some troubleshooting commands to run when you run into issues.
wsl --set-default-version 1 bcdedit /set hypervisorlaunchtype auto start
Now that Ubuntu Linux is installed and ready to use, continue below to install the LEMP server to run Joomla on. First, install Nginx HTTP Server.
Install Nginx HTTP Server
Joomla requires a web server to function, and Nginx is one of the most popular opensource web server available today.
To install Nginx on Ubuntu, run the commands below:
sudo apt update sudo apt install nginx
After installing Nginx, the commands below can be used to stop and start Nginx services.
sudo service nginx stop sudo service nginx start
To test whether Nginx is installed and functioning, open your web browser and browse to the server’s IP address or hostname.
If you see the above page in your browser, then Nginx is working as expected.
Install MariaDB Server
You’ll also need a database server to run Joomla. A database server is where Joomla content get stored.
A true open source database server that you can use with Joomla is MariaDB database server. It is fast, secure and the default server for almost all Linux servers.
To install MariaDB, run the commands below:
sudo apt install mariadb-server mariadb-client
After installing MariaDB, the commands below can be used to stop, start and enable MariaDB service to always start up when the server boots.
sudo service mysql stop sudo service mysql start
Next, run the commands below to secure the database server with a root password if you were not prompted to do so during the installation.
sudo mysql_secure_installation
When prompted, answer the questions below by following the guide.
- Enter current password for root (enter for none): Just press the Enter
- Set root password? [Y/n]: Y
- New password: Enter password
- Re-enter new password: Repeat password
- Remove anonymous users? [Y/n]: Y
- Disallow root login remotely? [Y/n]: Y
- Remove test database and access to it? [Y/n]: Y
- Reload privilege tables now? [Y/n]: Y
To verify and validate that MariaDB is installed and working, login to the database console using the commands below:
sudo mysql -u root -p
type the root password when prompted.
If you see a similar screen as shown above, then the server was successfully installed.
Install PHP and Related Modules
Joomla is a PHP based application, and PHP is required to run it. Run the commands below to install PHP and related modules to support Joomla.
sudo apt install php-fpm php-common php-mysql php-gmp php-curl php-intl php-mbstring php-xmlrpc php-gd php-xml php-cli php-zip
After installing PHP, go and configure some basic settings that may be required for Joomla to function properly.
For this tutorial, PHP 7.4 was installed. Based on your environment, another version of PHP might be installed. So verify that.
sudo nano /etc/php/7.4/fpm/php.ini
Below are good settings to configure for most Joomla websites.
file_uploads = On allow_url_fopen = On short_open_tag = On memory_limit = 256M cgi.fix_pathinfo = 0 upload_max_filesize = 100M max_execution_time = 360 date.timezone = America/Chicago
That should get PHP 7.4 installed with some basic settings to allow Joomla to function.
After setting up PHP, the command below can be used to stop and start PHP7.4 services.
sudo service php7.4-fpm stop sudo service php7.4-fpm start
Create Joomla Database
When all the servers installed above, it’s now time to begin setting up Joomla environment. First, run the steps below to create a blank database for Joomla to use.
Logon to MariaDB database console using the commands below:
sudo mysql -u root -p
Then create a database called joomladb
CREATE DATABASE joomladb;
Next, create a database user called joomladbuser and set password
CREATE USER 'joomladbuser'@'localhost' IDENTIFIED BY 'new_password_here';
Then grant the user full access to the database.
GRANT ALL ON joomladb.* TO 'joomladbuser'@'localhost' WITH GRANT OPTION;
Finally, save your changes and exit.
FLUSH PRIVILEGES; EXIT;
Create Joomla Database
When all the servers installed above, it’s now time to begin setting up Joomla environment. First, run the steps below to create a blank database for Joomla to use.
Logon to MariaDB database console using the commands below:
sudo mysql -u root -p
Then create a database called joomladb
CREATE DATABASE joomladb;
Next, create a database user called joomladbuser and set password
CREATE USER 'joomladbuser'@'localhost' IDENTIFIED BY 'new_password_here';
Then grant the user full access to the database.
GRANT ALL ON joomladb.* TO 'joomladbuser'@'localhost' WITH GRANT OPTION;
Finally, save your changes and exit.
FLUSH PRIVILEGES; EXIT;
Download Joomla
At this point, Joomla is ready to be downloaded and installed. Use the commands below to download the latest version of Joomla.
To view Joomla releases, see this page.
cd /tmp wget sudo unzip -d /var/www/joomla /tmp/Joomla_3-9-27-Stable-Full_Package.zip
Then run command below to allow www-data user to own the Joomla directory.
sudo chown -R www-data:www-data /var/www/joomla/ sudo chmod -R 755 /var/www/joomla/
Configure Nginx VirtualHost
Below is where you configure Nginx VirtualHost file for the Joomla site you’re creating. This file defines how client requests are handled and processed.
Run the commands below to create a new VirtualHost file called Joomla in the /etc/nginx/sites-available/ directory.
sudo nano /etc/nginx/sites-available/joomla
A very good configuration settings for most Joomla site on Nginx server is below. This configuration should work great.
Copy the content below and save into the file created above.
server {
listen 80;
listen [::]:80;
root /var/www/joomla;
index index.php index.html index.htm;
server_name example.com www.example.com;
client_max_body_size 100M;
autoindex off;
location / {
try_files $uri $uri/ /index.php?$args;
}
# deny running scripts inside writable directories
location ~* /(images|cache|media|logs|tmp)/.*.(php|pl|py|jsp|asp|sh|cgi)$ {
return 403;
error_page 403 /403_error.html;
}
location ~ .php$ {
include snippets/fastcgi-php.conf;
fastcgi_pass unix:/run/php/php7.4-fpm.sock;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
Save the file and exit.
After saving the file above, run the commands below to enable the new site, then restart Nginx server.
sudo ln -s /etc/nginx/sites-available/joomla /etc/nginx/sites-enabled/ sudo service nginx restart
At this stage, Joomla is ready and can be launched by going to the server’s IP or hostname.
That should bring up Joomla setup wizard. Type in the site name, create an administrator account and continue.
Type in the database connection and continue
Finalize the setup and click Install to complete the installation.
Login with account above and you’re done.
That’s it!
Conclusion:
This post showed you how to install Joomla on Windows 11 with Ubuntu. If you find any error above, please use the comment form below to report.
You may also like the post below:
